For Shop Owners

B0004 LINCOLN - Driver Knee Bolster Deployment Control

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3 What does this mean?

Possible causes

  • Faulty Driver Knee Airbag
  • Driver Knee Airbag harness is open or shorted
  • Driver Knee Airbag circuit poor electrical connection
What does this mean?
OBDII Code B0004 Lincoln - Driver Knee Bolster Deployment Control - kvjournal.ru

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

Need more help?

Do you need more help with the B0004 Lincoln code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
Check this articles: code po113 | toyota sienna vsc system | p1134 code | code 0172
Posted and Edit by kvjournal.ru 09-16-2016